Asbestos Removal in Albuquerque, NM
A lot of Albuquerque’s housing stock was built before asbestos was phased out of common building materials, which means popcorn ceilings, vinyl floor tile, and old HVAC duct insulation in many area homes may still contain it. Our licensed team tests, safely removes, and properly disposes of asbestos materials, so a renovation, repair, or peace-of-mind check doesn’t turn into a bigger risk.
Licensed asbestos testing and abatement
Free on-site inspection
Compliant disposal, documented every step
Common Places Asbestos Turns Up in Older Albuquerque Homes
Asbestos itself isn’t dangerous sitting undisturbed. It becomes a health hazard once fibers get released into the air, usually during a renovation, repair, or demolition. Here’s where our Albuquerque crews find it most often.
Popcorn ceilings and textured drywall
Textured ceiling and wall finishes applied before the mid-1980s commonly used asbestos for fire resistance and texture. Any sanding, scraping, or drilling into these surfaces can release fibers if it hasn’t been tested first.
Vinyl floor tile and adhesive
Older vinyl floor tiles, along with the black mastic adhesive underneath, were frequently made with asbestos through the 1980s. Removing or breaking these tiles without testing is one of the most common ways homeowners unknowingly disturb asbestos.
Vermiculite attic insulation
Loose-fill vermiculite insulation, common in older Albuquerque attics, has a documented history of asbestos contamination from a now-closed source mine. We test and, when needed, safely remove and replace it.
HVAC duct insulation and wrap
Older ductwork was often insulated or sealed with asbestos-containing material, especially in homes with original heating systems. This is a frequent find during HVAC replacement or attic work.
Roofing, siding, and exterior stucco materials
Some older roofing shingles, cement siding panels, and stucco mixes used asbestos for durability and fire resistance. This becomes relevant during roof replacement, re-stuccoing, or exterior renovation.
Pipe insulation and boiler wrap
Homes and commercial buildings with older heating systems sometimes have asbestos-wrapped pipes or boiler insulation, particularly in basements, crawl spaces, and mechanical rooms.
ASBESTOS REMOVAL BACKED BY LOCAL EXPERIENCE
Albuquerque’s housing stock spans decades of construction, and a large share of it predates the mid-1980s phase-out of asbestos in common building materials. From popcorn ceilings and vinyl floor tile in older Nob Hill and North Valley homes to vermiculite attic insulation and original HVAC duct wrap, American Restoration understands where asbestos tends to turn up in local properties. We bring that regional experience to every testing and abatement project, combining licensed removal, clear communication, and compliant documentation under one team.
Local Knowledge
Our team works throughout Albuquerque and across New Mexico, giving us firsthand experience with the asbestos-containing materials common to homes and commercial properties built before the mid-1980s, including textured ceilings, vinyl tile, vermiculite insulation, and older duct wrap.
Complete Abatement
We handle the entire process, from testing and containment to licensed removal, disposal, and any repair work needed afterward. Having one team manage the project keeps everything moving efficiently from the first inspection through the final repair.
Insurance and Compliance Support
Asbestos work carries specific regulatory documentation requirements. We provide compliant paperwork, communicate throughout the project, and help simplify the process for compliance records, real estate transactions, or insurance purposes.
What to Expect
Here is how our Albuquerque asbestos removal process works, from the first call to clearance.
01
Step 01
Inspection and Sampling
We inspect suspect materials and take samples for laboratory testing to confirm whether asbestos is present before any removal work begins.
02
Step 02
Containment Setup
Once asbestos is confirmed, we seal off the work area with negative air pressure and physical barriers to prevent fibers from spreading to the rest of the property.
03
Step 03
Licensed Abatement and Removal
Our licensed technicians remove the asbestos-containing material using approved wet-removal and containment methods, minimizing fiber release throughout the process.
04
Step 04
Disposal and Clearance Documentation
Materials are bagged, labeled, and disposed of at an approved facility per state and federal regulations, and we provide documentation confirming the work was completed to code.
500+ Families Trusted Us With Their Worst Day
★★★★★ 4.6 based on 500+ Google reviews
★★★★★
“We had a water leak, and they sent us Ryan. It was super professional and he provided us with great knowledge. Great service. Great timing. I am so grateful for the work as a job well done.“
Justine M.
★★★★★
“When I called they were able to come out within an hour. Nathan explained what happened, what needed to be done and stayed until the plumbers fixed the leak so he could get his equipment going. I’m so happy with the clean up.”
Jean C.
★★★★★
“This is the 2nd time I’ve utilized this company after a water leak. First time by luck. Second time by CHOICE. Top rate customer service and advocacy with the insurance company. Jesse and everyone I’ve encountered are top notch. I’m sure I’ll be back to add more names!”
C.K.
Asbestos should not be sanded, drilled, or torn out before it’s tested. Disturbing suspect material without testing first is one of the most common ways homeowners unknowingly release fibers into the air their families breathe.
Licensed testing and removal protect your health, keep your project on the right side of state and federal regulations, and give property owners a clear path from inspection to a finished repair.
Why Albuquerque Property Owners Call Us First
When you need asbestos testing or removal, you want a licensed team that handles it correctly the first time and gives you documentation to prove it. Here’s what sets us apart.
We’re licensed for asbestos abatement, not just general contracting
Asbestos work requires specific state licensing beyond a general contractor’s license. Our team holds that certification and follows approved containment and removal protocols on every job.
We test before we assume
Not every popcorn ceiling or old floor tile contains asbestos, and not every renovation needs abatement. We test first so you’re not paying for removal you don’t actually need, or skipping testing you do.
One team, testing through repair
We test, remove, dispose of the material properly, and our own licensed contractors handle the drywall, flooring, or ceiling repair afterward, so you’re not managing multiple contractors for one project.
We document for compliance and insurance
Asbestos abatement has specific regulatory documentation requirements. We provide the paperwork you need for compliance records, real estate transactions, or insurance purposes.
24/7, including holidays
A real person answers your call day or night, which matters when asbestos-containing material is exposed unexpectedly, such as after storm damage or an accidental disturbance during a project.
We Don’t Just Clean Up. We Restore Your Life.
Whatever your property needs next, our team can help. Browse our other restoration services below.
Asbestos Removal Across Albuquerque
We serve homes and businesses throughout Albuquerque, including many of the city’s older neighborhoods where pre-1980s building materials are still common, from the North Valley and Downtown to Nob Hill and the Northeast Heights.
Free On-Site Inspection
Across the Albuquerque metro
20+ Service Areas
Across NM & West Texas
Call Now
Frequently Asked Questions
How do I know if my Albuquerque home has asbestos?
Age is the biggest indicator. Homes built before the mid-1980s are far more likely to have asbestos in ceiling texture, floor tile, insulation, or siding. The only way to know for certain is lab testing of the specific material.
Is it safe to live in a home with asbestos?
Yes, if the material is intact and undisturbed. Asbestos becomes hazardous when fibers are released into the air, which typically happens during sanding, drilling, demolition, or damage, not from simply being present in a stable condition.
Do I need testing before a renovation?
If your home was built before the mid-1980s and you plan to sand, drill, remove, or demolish any part of it, testing suspect materials first is strongly recommended. It’s a small step that avoids a much larger exposure and cleanup issue.
How long does asbestos removal take?
A single material, like floor tile in one room, is often completed in a day or two. Larger jobs involving attic insulation, extensive ductwork, or multiple rooms can take longer. Timeline depends on the scope confirmed during inspection.
Is asbestos removal regulated?
Yes. Asbestos abatement is regulated at the state and federal level, with specific requirements for licensing, containment, and disposal. We follow these requirements on every job and provide documentation confirming compliance.
Does homeowners insurance cover asbestos removal?
It depends on the circumstances. Asbestos removal tied to a covered event, like storm or fire damage that exposed the material, may be covered, while routine removal for renovation purposes typically is not. We can help you understand what applies to your situation.
How much does asbestos removal cost?
Cost depends on the material involved, the size of the affected area, and whether repair or replacement is needed afterward. Because every property is different, we start with a free on-site inspection before providing a scope of work.
Do you offer asbestos removal near me in Albuquerque?
Yes. We are a local, licensed asbestos removal company serving Albuquerque, Rio Rancho, Santa Fe, Bernalillo, and surrounding communities.
If you do not see your question here, call our team any time and we will walk you through the next step.
Free On-Site Inspection
Test Before You Touch It
If your Albuquerque home was built before the mid-1980s, testing suspect materials before any renovation or repair is the safest first step. Get a licensed crew out to inspect, test, and remove safely if needed.
Request Free Inspection