Mold Removal and Remediation Services
Professional mold inspection, mold removal, and remediation across New Mexico and West Texas. We identify moisture sources, contain affected areas, remove mold-damaged materials, clean contaminated surfaces, and help restore your property safely. Both residential and commercial mold remediation, handled end to end.
~75 min average response
Free on-site inspection
Insurance-ready documentation
Call (505) 390-8728
Request a Free Inspection
Certified Technicians
Insurance-ready documentation
24/7 including holidays
Same day service
Mold Problems Start With Moisture, but They Rarely Stop There
Our team inspects the affected area, traces the source, contains the problem, removes damaged materials, and helps prevent the issue from returning.
Visible mold growth
If you see mold growth on drywall, ceilings, baseboards, flooring, cabinets, or other surfaces, we inspect the affected area and build a mold remediation plan based on the size and severity of the problem. Suspected black mold is always handled by certified technicians.
Hidden moisture and suspected mold
Mold is often connected to leaks, flooding, roof damage, plumbing issues, humidity, or materials that were never dried properly. We check for moisture and look beyond the visible surface, since hidden mold is usually only confirmed by a professional mold inspection and moisture assessment.
Mold after water damage
Flooding, burst pipes, appliance leaks, sewage backups, and roof leaks create ideal conditions for mold growth when materials stay wet too long. Combining water damage restoration with mold remediation stops the cycle at the source.
Containment and cross-contamination control
Once remediation begins, we isolate affected areas with barriers and negative air pressure, then run HEPA air filtration. This protects unaffected spaces so mold spores and contaminated dust do not spread through the property during mold removal.
Porous material removal
Drywall, insulation, carpet, padding, and ceiling tiles often cannot be safely cleaned once mold has grown into them. We document and remove those materials as part of the mold remediation scope, then clean and treat the surfaces underneath to discourage regrowth.
Repairs and rebuild planning
After mold remediation, damaged materials need to be replaced. We coordinate the next phase so cleanup, documentation, and reconstruction stay connected and you are not left with an unfinished space.
Not sure whether what you’re seeing is mold? Call (505) 421-7796 and we’ll tell you honestly.
what to expect
From inspection through containment, removal, cleaning, drying, and repair planning, every step of our mold remediation process is designed to address the source of the problem and reduce the chance of mold returning.
01
Step 01
Inspect the Affected Area and Find the Moisture Source
We inspect visible growth, check surrounding materials, look for hidden moisture, and identify the leak, humidity issue, or past water damage that allowed mold to grow. Fixing the source is what keeps mold from coming back.
02
Step 02
Set Containment and Protect Unaffected Areas
Before mold removal begins, we isolate the affected space, protect nearby areas, and set up HEPA air filtration to reduce cross-contamination during remediation.
03
Step 03
Remove Damaged Materials and Clean Affected Surfaces
Mold-damaged materials that cannot be safely cleaned are removed and documented. Remaining surfaces are cleaned and treated using professional mold remediation methods matched to the scope of contamination.
04
Step 04
Dry, Document, and Complete Repairs
After mold removal and cleaning, we dry the space thoroughly. We document the completed mold remediation scope for your records and your claim, and coordinate repairs when walls, flooring, trim, cabinets, or finishes need to be restored.
500+ Families Trusted Us With Their Worst Day
★★★★★ 4.6 based on 500+ Google reviews
★★★★★
“All of the team that came by were very nice and considerate of the house. They were able to work with my schedule and did a very thorough and quick job of all the mitigation/remediation needed. Highly recommend.”
Dominic C.
★★★★★
“They were very patient with the repetitive questions and explained things so that we understood. I appreciated the good communication and kindness when dealing the chaos. They paid attention to details and checked in with us to confirm we were pleased. If we ever need help with anything in the future this is who we would utilize.“
Kadyn W.
★★★★★
“The workers that came to my house were very respectful and polite. I highly recommend American Restoration! Thank you Andy!!“
Di M.
Mold should not be ignored, especially when the affected area is larger than a small surface spot, the source is unclear, or moisture is still present.
Fast inspection helps identify what caused the mold, what materials are affected, and what needs to happen before the problem spreads or returns.
Why People Call Us First
Mold work is easy to do badly. Anyone can wipe a wall, but stopping mold for good takes source control, containment, and documentation. Here is what sets our team apart:
We treat the cause, not just the stain
Mold always returns if the moisture feeding it is still there. We trace the leak, humidity issue, or past water loss first, then remediate, so you are not calling someone back in six months.
Containment done properly
Bad remediation spreads spores through the rest of the house. We use sealed barriers, negative air pressure, and HEPA filtration to keep contamination inside the work zone where it belongs.
Certified technicians, documented work
Our IICRC-certified crews follow industry standards and document the full scope, which gives you a clear before-and-after record for your insurer or a future buyer.
Remediation and repairs from one team
We remove the affected drywall, insulation, and flooring, then rebuild it. One accountable contractor from inspection through final finish.
24/7, including holidays
A real person answers your call and a local crew is dispatched quickly, because mold spreads every day it is left alone.
We Don’t Just Clean Up. We Restore Your Life.
Mold often follows water damage, hidden leaks, or excess moisture in the home. Browse related restoration services below.
Serving New Mexico & West Texas
We service homes and businesses across New Mexico and the El Paso region. Local crews aim to be on-site in about 75 minutes, 24/7. That puts certified mold remediation close to home, wherever you are in the region.
~75 Min On-Site
Typical metro response
20+ Service Areas
Across NM & West Texas
Frequently Asked Questions
What should I do if I find mold in my home?
Avoid disturbing the affected area, especially if mold is growing on drywall, insulation, carpet, or other porous materials. Do not paint over it or try to cover it up. Call us so we can inspect the area, find the moisture source, and recommend the right remediation plan.
What is the difference between mold removal and mold remediation?
Mold removal means physically taking mold out of an area. Mold remediation is the complete process: inspecting, containing, removing, cleaning the air, and fixing the moisture source so it does not return. We provide full remediation, not just surface cleaning.
Do I need mold testing before remediation?
Not always. If visible mold is present, remediation is usually the priority. Testing helps when the source is unclear, hidden mold is suspected, a real estate transaction requires documentation, or post-remediation clearance is requested.
What causes mold to grow indoors?
Mold needs moisture. Common causes include plumbing leaks, roof leaks, past water damage, poor ventilation, condensation, crawl space humidity, appliance leaks, and materials that stayed wet too long after a water event.
Is mold dangerous to my health?
Mold exposure can cause respiratory issues, allergic reactions, headaches, and other problems, especially for children, older adults, and anyone with asthma or a weakened immune system. If symptoms improve when you leave the property, mold may be the cause.
Can mold come back after removal?
Yes, if the moisture source is not fixed, which is the most common reason regrowth happens. Professional remediation focuses on source control, containment, removal, cleaning, drying, and prevention, not just the visible growth.
How long does mold remediation take?
The timeline depends on the size of the affected area, the materials involved, the moisture source, and whether repairs are needed afterward. Smaller projects may take a few days, while larger remediation and reconstruction can take longer.
How much does mold remediation cost?
Cost depends on the size of the affected area, where the mold is located, and how much contaminated material must be removed. A small bathroom job costs far less than widespread hidden growth. We provide an on-site inspection and a clear written estimate before work begins.
Will insurance cover mold remediation?
Coverage depends on your policy and the cause of the moisture problem. Mold from a sudden, accidental water loss is often covered, while long-term leaks or maintenance issues may be limited or excluded. We document the damage and communicate with your carrier.
Do you offer mold remediation near me?
Yes. We are a local mold remediation company serving Albuquerque, Rio Rancho, Santa Fe, Las Cruces, El Paso, and communities across New Mexico and West Texas, with 24/7 response.
If you do not see your question here, call our team any time and we will walk you through the next step.
Need Help With Mold Remediation?
Do not wait if you see visible mold, smell musty odors, notice staining, or suspect hidden moisture. Call now to request a mold inspection and get a clear mold remediation plan for your home or business.