Fire Damage Restoration Services
When fire strikes, the damage doesn’t stop when the flames go out. Smoke, soot, and leftover water keep working long after the trucks leave, and trapped moisture can turn into mold. Our fire damage restoration crews are on call 24/7 to secure your property and start putting it back together.
~75 min average response
Free on-site inspection
Insurance-ready documentation
Call (505) 390-8728
Request a Free Inspection
Certified Technicians
Insurance-ready documentation
24/7 including holidays
Same day service
Soot + odor cleanup
The Damage You Can’t See Is Usually the Worst
Soot and ash are corrosive. Left alone, they etch surfaces, stain permanently, and push odor deep into walls, ductwork, and insulation. That’s why smoke damage cleanup and soot removal matter as much as the visible repairs. If any of this sounds like your situation, you’re in the right place.
Kitchen and grease fires
Cooking fires leave greasy, protein-based residue that clings to cabinets, ceilings, and appliances and produces a stubborn odor. These need specialized degreasing and deodorization rather than ordinary cleaning.
Electrical fires
Faulty wiring and overloaded circuits damage outlets, conduit, and surrounding building materials, often inside wall cavities. We work with licensed trades to make the area safe before any rebuilding begins.
Wildfire and exterior smoke damage
New Mexico’s dry season brings char, ash, and smoke that infiltrate homes even when flames never reach the structure. We clean exterior surfaces and treat the smoke and ash that made it inside.
Furnace puff-back and appliance fires
A misfiring furnace can spray oily black soot through every vent in the building in seconds. Duct cleaning and full-property soot removal are usually both required.
Smoke, soot, and odor damage
Smoke travels far beyond the burn area, settling into insulation, HVAC systems, contents, and wall cavities. We address odor at the source with professional smoke odor removal instead of masking it.
Water damage and structural repairs after firefighting
Fire suppression leaves behind standing water that soaks framing, drywall, and flooring. We extract it, dry the structure to prevent mold, then rebuild what the fire and water took.
Because wet smoke, dry smoke, and protein residues all behave differently, our technicians match the cleaning method to your specific damage. Not sure what you’re dealing with? Call (505) 421-7796 and we’ll tell you honestly.
What to expect
Here is how our fire damage restoration process works, from the emergency call to the final coat of paint. Every step is built to stabilize the property first, then bring it back.
01
Step 01
Emergency Response, Board-Up, and Inspection
We dispatch a certified crew around the clock, then secure the building with emergency board-up and roof tarping to keep out weather, animals, and intruders. From there, we assess the full extent of the fire, smoke, soot, and water damage and document everything for your claim.
02
Step 02
Water Removal and Debris Clearing
Firefighting usually leaves gallons of standing water behind, so extraction and structural drying come first to head off mold. Charred debris and materials too damaged to save are removed and disposed of.
03
Step 03
Soot Removal, Cleaning, and Smoke Odor Treatment
We clean corrosive soot from surfaces, contents, and ductwork using the method suited to that residue type. Contents can be packed out, cleaned, and stored, while professional deodorization removes smoke odor at the source rather than covering it.
04
Step 04
Repairs, Reconstruction, and Final Walkthrough
Our licensed contractors rebuild what the fire damaged, from drywall, paint, and flooring through framing and structural repairs. We finish with a walkthrough so you can confirm the work before the project closes.
500+ Families Trusted Us With Their Worst Day
★★★★★ 4.6 based on 500+ Google reviews
★★★★★
“I had a great experience with this company. They answered all of my questions and even went above and beyond in the work they did for me. The communication was excellent from start to finish. I would definitely use their services in the future.“
Susan C.
★★★★★
“I had the pleasure of working with Robert after experiencing a fire loss at my home, and I can’t thank him enough for everything he did. He was professional, compassionate, and incredibly helpful throughout the process. He took the time to explain each step, kept me updated, and made sure everything was handled properly. In a really stressful time, he brought a sense of calm and confidence.“
Ruby K.
★★★★★
“I had an amazing experience with American Restoration Water and Fire after damage to my home. From the very beginning, their team was professional, responsive, and incredibly knowledgeable. They worked quickly to clean up the damage, kept me informed throughout the entire process, and treated my home with care and respect.“
Elena V.
Every hour soot sits on a surface, it etches a little deeper. What could have been cleaned on day one often has to be replaced by week two.
Calling a certified fire damage restoration team early protects your contents, shortens the rebuild, and keeps the claim smaller for everyone involved.
Why People Call Us First
A fire leaves you with more than damage. It leaves questions, disruption, and a home you can’t use. Here is how we make the whole ordeal easier to get through:
One point of contact, start to finish
A dedicated project manager owns your job from board-up through final paint, so you always know what is happening next and who to ask. No bouncing between crews or repeating your story.
Answers in plain English
We walk you through the damage, the plan, and the timeline without burying you in restoration jargon. You will understand what we are doing and why before we do it.
An advocate with your insurer
We photograph and itemize every loss, then deal with the adjuster directly, so you are not fighting your fire damage claim alone while trying to hold everything else together.
Cleanup and rebuild under one roof
Soot removal, smoke odor treatment, structural drying, and full reconstruction all come from the same team. That means fewer delays, no finger-pointing, and one accountable contractor.
Someone in your corner
From the first call to the final walkthrough, you have a local crew that treats your home the way they would want theirs handled. That matters on the worst day of your year.
We Don’t Just Clean Up. We Restore Your Life.
Fire rarely arrives alone. Whatever your property needs next, our team handles it.
Serving New Mexico & West Texas
We service homes and businesses across New Mexico and the El Paso region. Local crews aim to be on-site in about 75 minutes, 24/7. That puts emergency fire and smoke damage restoration close to home, wherever you are in the region.
~75 Min On-Site
Typical metro response
20+ Service Areas
Across NM & West Texas
Frequently Asked Questions
How soon should I start fire damage cleanup?
Cleanup should begin as soon as the property is cleared for entry. Soot becomes more corrosive over time, and water left from firefighting can start growing mold within a day or two.
Is it safe to stay in my home after a fire?
Not always. Fire can weaken structural elements and leave harmful particles in the air, even in rooms that never burned. A professional inspection is recommended before anyone re-enters.
What does fire damage restoration include?
It typically covers emergency board-up, debris removal, water extraction and drying, soot cleanup, smoke odor removal, contents cleaning, and the repairs or reconstruction needed afterward.
Can smoke damage affect areas not directly burned?
Yes. Smoke travels through walls, vents, and insulation, leaving odor and residue in rooms far from the flames. This is one of the most common surprises for homeowners after a fire.
Do you help with fire damage insurance claims?
Yes. We document the damage in detail and work directly with your insurance provider, supporting the claim from initial cleanup through final reconstruction.
How much does fire damage restoration cost?
Cost depends on the size of the fire, the extent of smoke and soot damage, and how much rebuilding is required. We provide an on-site assessment and work with your insurer, since fire damage is commonly covered.
How long does fire damage restoration take?
A small smoke cleanup may take a few days, while major restoration and rebuilding can run several weeks. After the inspection, we give you a clear timeline before work begins.
Do you offer fire damage restoration near me?
Yes. We are a local fire damage restoration company serving Albuquerque, Rio Rancho, Santa Fe, Las Cruces, El Paso, and communities across New Mexico and West Texas, with 24/7 emergency response.
If you do not see your question here, call our team any time and we will walk you through the next step.
Fire Damage Restoration That Gets You Home Again
A fire turns your whole world upside down. One call puts an experienced local crew to work, from the first board-up to the last coat of paint, so you can focus on your family while we handle the rest.